interference, try to correct the interference by using one or more of the following measures:
i)Move the digital device away from the affected receiver.
ii)Reposition (turn) the digital device with respect to the affected receiver.
iii)Reorient the affected receiver’s antenna.
iv)Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits.
v)Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of high RF emission levels.)
vi)Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs. (Removing or cutting the power cord ground may increase RF emission levels and may also present a lethal shock hazard to the user.)
vii)If you need additional help, consult your dealer, manufacturer, or an experienced radio or televi- sion technician.
III. Agency Certifications
The following Certifications have been issued for the monitor:
•Argentina
•Australia
•China
•China RoHS
•EU RoHS
•Europe CE
•FCC
•Japan VCCI
•Korea
•Mexico
•Russia
•Singapore
•Taiwan
•United States
• | WEEE | Elo TouchSystems 2200L User Guide 31 |
|
|
