Grey Headline (continued)
Command Reference - xConfiguration
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Zones Zone [1..200] Neighbor SIP Transport: <UDP/TCP/TLS>
Determines which transport type will be used for SIP calls to and from this neighbor.
Default: TCP
Example: xConfiguration Zones Zone 1 Neighbor SIP Transport: TCP
Zones Zone [1..200] SIP Mode: <On/Off>
Determines whether SIP calls will be allowed to and from this zone.
Default: On
Example: xConfiguration Zones Zone 1 SIP Mode: On
Zones Zone [1..200] TraversalClient H323 Port: <1024..65534>
Specifies the port on the traversal server to be used for H.323 firewall traversal calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been configured in the Traversal Server zone for this VCS.
Default: 2777
Example: xConfiguration Zones Zone 2 TraversalClient H323 Port: 2777
Zones Zone [1..200] TraversalClient H323 Protocol: <Assent/H46018>
Determines which of the two firewall traversal protocols will be used for calls to and from the traversal server.
Note: the same protocol must be set on the server for calls to and from this traversal client.
Default: Assent
Example: xConfiguration Zones Zone 2 TraversalClient H323 Protocol: Assent
Zones Zone [1..200] TraversalClient Peer [1..6] Address : <S:0..128>
Specifies the IP Address or Fully Qualified Domain Name (FQDN) of the traversal server. If the traversal server is a VCS Expressway cluster, this will be one of the peers in that cluster.
Example: xConfiguration Zones Zone 2 TraversalClient Peer 1 Address : "10.192.168.1"
Zones Zone [1..200] TraversalClient RetryInterval: <1..65534>
Specifies the interval (in seconds) with which a failed attempt to establish a connection to the traversal server should be retried.
Default: 120
Example: xConfiguration Zones Zone 2 TraversalClient RetryInterval: 120
Zones Zone [1..200] TraversalClient SIP Port: <1024..65534>
Specifies the port on the traversal server to be used for SIP calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been configured in the Traversal Server zone for this VCS.
Default: 5060
Example: xConfiguration Zones Zone 2 TraversalClient SIP Port: 5060
Introduction | Getting Started |
| Overview and |
| System |
| VCS |
| Zones and |
| Call |
| Bandwidth |
| Firewall |
| Applications |
| Maintenance |
| Appendices |
| Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control |
| Traversal |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.04 |
|
|
|
|
|
|
|
| 239 |
|
|
|
|
|
|
|
|
|
| ||
JULY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
