TANDBERG D14049.04 manual 151, Quick Guide to VCS Traversal Client Server Configuration

Grey Headline (continued)

Quick Guide to VCS Traversal Client - Server Configuration

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Overview VCS Control (Client)

Full details of how to configure a VCS Control and VCS Expressway as traversal client and

server respectively are given in the following  pages. However, the basic steps are:

Ensure the VCS Control has been configured with an Authentication

username and Authentication password to use as its External Registration Credentials. These can be added or edited via VCS Configuration > Authentication > Configuration (or by clicking on the Edit Authentication Username/Password link in the Edit Zone page for an existing Traversal Client Zone).

On the VCS Expressway, create a

Traversal Server Zone (this represents

the incoming connection from the VCS Control). In the Client authentication username field, enter the VCS Control’s Authentication username.

On the VCS Expressway, add the VCS

Control’s authentication username and

password as credentials in the authentication database. These can be added or edited via VCS Configuration > Authentication > Local Database, or by clicking on the Add/Edit Local Authentication Database link in the Edit Zone page.

On the VCS Control, create a Traversal

Client Zone (this represents the

connection to the VCS Expressway). Enter the VCS Expressway’s IP address or FQDN in the Peer 1 address field.

On the VCS Control, configure all the modes and ports in the Protocol section

to match identically those of the Traversal Server Zone on the VCS Expressway.

VCS Expressway (Server)









Introduction	Getting Started	Overview and	System	VCS	Zones and	Call	Bandwidth	Firewall	Applications	Maintenance	Appendices
		Status	Configuration	Configuration	Neighbors	Processing	Control	Traversal
D14049.04					151
JULY 2008