TANDBERG D14049.04 115, Enabling the use of Administrator Policy, Administrator Policy Mode

Grey Headline (continued)

Administrator Policy

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Enabling the use of Administrator Policy

To enable Administrator Policy:

•VCS Configuration > Call Policy.

You will be taken to the Call Policy page.

•xConfiguration Policy AdministratorPolicy Mode

Once you have enabled the use of

Administrator Policy, you must define

the policy to be used. This is done either via the web interface or by uploading a CPL script.

If Administrator Policy is on but a policy has not been configured, then a default policy will be applied that allows all calls, regardless of source or destination.

Administrator Policy Mode

On: Administrator Policy is enabled. If a CPL script has been uploaded, this policy will be used. Otherwise, the policy configured via the Administrator Policy section will be used.

Off: Administrator Policy is not in use.

Save

You must click here for any changes to the Administrator Policy Mode to take effect.

Introduction	Getting Started	Overview and	System	VCS	Zones and	Call	Bandwidth	Firewall	Applications	Maintenance	Appendices
		Status	Configuration	Configuration	Neighbors	Processing	Control	Traversal
D14049.04					115
JULY 2008