Grey Headline (continued)

Command Reference - xConfiguration

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Administration HTTP Mode: <On/Off>

Determines whether HTTP calls will be redirected to the HTTPS port.

On: calls will be redirected to HTTPS.

Off: no HTTP access will be available.

Note: You must restart the system for any changes to take effect.

Default: On

Example: xConfiguration Administration HTTP Mode: On

Administration HTTPS Mode: <On/Off>

Determines whether the VCS can be accessed via the web server. This must be On to enable both web interface and TMS access.

Note: You must restart the system for any changes to take effect.

Default: On

Example: xConfiguration Administration HTTPS Mode: On

Administration SSH Mode: <On/Off>

Determines whether the VCS can be accessed via SSH and SCP.

Note: You must restart the system for any changes to take effect.

Default: On

Example: xConfiguration Administration SSH Mode: On

Administration Telnet Mode: <On/Off>

Determines whether the VCS can be accessed via telnet.

Note: You must restart the system for any changes to take effect.

Default: Off

Example: xConfiguration Administration Telnet Mode: Off

Administration TimeOut: <0..10000>

Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of 0 turns session time outs off. Default: 0

Example: xConfiguration Administration TimeOut: 0

Alternates Peer [1..6] Address: <S: 0, 128>

Specifies the IP Address of one of the Peers in the Cluster to which this VCS belongs. A Cluster consists of up to 6 Peers, including the local VCS.

Note: Clusters should be managed via TMS.

Note: must be a Valid IPv4 or IPv6 address

Example: xConfiguration Alternates 1 Peer Address: "10.13.0.2"

Introduction

Getting Started

 

Overview and

 

System

 

VCS

 

Zones and

 

Call

 

Bandwidth

 

Firewall

 

Applications

 

Maintenance

 

Appendices

 

Status

 

Configuration

 

Configuration

 

Neighbors

 

Processing

 

Control

 

Traversal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D14049.04

 

 

 

 

 

 

 

 

213

 

 

 

 

 

 

 

 

 

 

JULY 2008

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 213
Image 213
TANDBERG D14049.04 manual 213