File Transfers

File Transfers

Transferring Switch Configurations

3.At the command prompt, execute one of the following commands:

To upload a configuration to a file on a PC or Unix workstation:

zput config remote_file [overwrite] [dos/unix]

To download a configuration from a file on a PC or Unix workstation:

zget config remote_file [dos/unix]

where: remote_file is the name of the file in which the configuration is stored

[overwrite] is one of the following optional values:

0(the default) allows a new file to be created, but does not allow an existing file to be overwritten.

1creates a new file or overwrites an existing file.

[dos/unix] is one of the following optional values:

0(the default) specifies the DOS file format.

1specifies the Unix file format.

If the PC or workstation does not respond to a ZPut or ZGet command within approximately 70 seconds, the command times out and control returns to the prompt line.

C-10

Page 102
Image 102
HP J3178A manual Zput config remotefile overwrite dos/unix