
the Management | Module |
Installing |
|
|
|
Installing the Management Module
Included Parts
Included Parts
Verify that these parts were included with the product:
•Switch 208/224 Management Module
•HP AdvanceStack Switch 208/224 Management Module Installation and Reference Guide
•Console cable
•HP AdvanceStack Assistant for Windows CD kit
•HP AdvanceStack Products CD kit
Installation Steps
C a u t i o n |
| |
| Static electricity can severely damage the sensitive electronic components on | |
| the module. When installing the module in your switch, follow these proce- | |
| dures to avoid damage from static electricity: | |
| ■ | Handle the module by its edges and avoid touching the components and |
|
| the circuitry on the board. |
| ■ | Equalize any static charge difference between your body and the switch |
|
| by wearing a wrist |
|
| metal body, or by frequently touching the switch's metal body while you |
|
| are installing the module. |
| 1. | Before installing the Switch Management Module, unplug your switch |
| ||
|
| from the power source. This protects the module and switch from poten- |
|
| tial electrical damage. |
| 2. | Unscrew the two captured screws holding the cover plate to the switch's |
|
| Management Slot and remove the cover, as shown in figure |
|
| the screws will release outward when unscrewed far enough. Do not |
|
| unscrew them completely from the cover plate. |