Switch

the Console

Monitoring

Operation From

 

 

Monitoring Switch Operation From the Console

Event Log

The event log holds up to 100 lines in chronological order, from the oldest to the newest. Each line consists of one complete event message. Once the log has received 100 entries, it discards the current oldest line each time a new line is received. The event log window contains 20 lines and can be positioned to any location in the log.

The log status line at the bottom of the display identifies where in the sequence of event messages the display is currently positioned.

The event log will be erased if any of the following occurs:

The switch is reset by using the Reset button on the Switch Management Module.

Power to the switch is interrupted, or the power is cycled.

A new operating system is downloaded to the switch.

(The event log is not erased by using the Reboot Switch command in the console Main Menu.)

5-14

Page 72
Image 72
HP J3178A manual Switch Console