BIOS Setup

Advanced BIOS Features

▶Boot Sequence

Press <Enter> to enter the sub-menu. ▶1st/ 2nd/ 3rd/ --- Boot Device

These items allow you to set the first/ second/ third boot device where BIOS attempts to load the disk operating system.

▶Boot From Other Device

Setting the option to [Yes] allows the system to try to boot from other device, if the system fails to boot from 1st boot device.

▶BIOS Flash Protection

This function protects the BIOS from accidental corruption by unauthorized users or computer viruses. When enabled, the BIOS’ data cannot be changed when attempting to update the BIOS with a Flash utility. To successfully update the BIOS, you will need to disable this Flash BIOS Protection function. You should enable this function at all times. The only time when you need to disable it is when you want to update the BIOS. After updating the BIOS, you should immediately re-enable it to protect it against viruses.

▶Full Screen Logo Display

This item enables this system to show the company logo on the boot-up screen. Settings are:

[Enabled]

Shows a still image (logo) on the full screen at boot.

[Disabled]

Shows the POST messages at boot.

3-8