BIOS Setup
▶Active Processor Cores
This item allows you to select the number of active processor cores.
▶Intel
EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field will appear after you installed the CPU which supports speedstep technology.
▶C1E
Support
To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E).
▶Intel
Turbo Boost
This item will appear when you install a CPU with Intel Turbo Boost technology. This item is used to enable/ disable Intel Turbo Boost technology. It can scale processor frequency higher dynamically when applications demand more performance and TDP headroom exists. It also can deliver seamless power scalability (Dynamically scale up,
▶Adjust CPU Base Frequency (MHz)
This item allows you to set the CPU Base clock (in MHz). You may overclock the CPU by adjusting this value. Please note the overclocking behavior is not guaranteed.
▶Adjust CPU Ratio
This item allows you to adjust the CPU ratio. Setting to [Startup] enables the CPU run- ning at the fastest speed which is detected by system.
▶Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Ratio).
▶Current iGPU
Frequency
These items show the current frequencies of iGPU.
▶MEMORY-Z
Press <Enter> to enter the
▶DIMM1~2 Memory SPD Information
Press <Enter> to enter the
▶Current DRAM Channel1~2 Timing
It shows the installed DRAM Timing.
