MSI H55M-E21 manual System doesn’t stop for any detected error

MS-7636

▶SATA1~6

Press <Enter> to enter the sub-menu and the following screen appears:

▶Device / Vendor / Size

It will show the device information that you connected to the SATA connector.

Important

SATA1~6 are appearing when you connect the HD devices to the SATA connectors on the mainboard.

▶Hold On

The setting determines whether the system will stop of an error is detected at boot. When the system stops of the errors preset, it will halt on for 15 seconds and then au- tomatically resume its operation. Available options are:

[All Error]	The system stops when any error is detected.
[No Error]	The system doesn’t stop for any detected error.

▶System Information

Press <Enter> to enter the sub-menu, and the following screen appears.

This sub-menu shows the CPU information, BIOS version and memory status of your system (read only).

Chapter 3

3-7