Configuring the Switch From the Console
Configurable Features
the Switch From | Console |
Configuring | the |
|
|
Figure 4-12. Example of the STP Configuration Screen
5.If the remaining STP parameter settings are adequate for your network, go to step 8.
6.Use [Tab] or the arrow keys to select the next parameter you want to change, then type in the new value. (If you need information on STP parameters, press [Enter] to select the Actions line, then press H to get help.)
7.Repeat step 6 for each additional parameter you want to change.
8.When you are finished editing parameters, press [Enter] to return to the
Actions line.
9.Press [S] to save the currently displayed STP parameter settings and return to the Configuration menu. The Spanning Tree configuration is automat- ically activated when it is saved.
