English
Features
1Safety cover
2Safety cover release
3Main unit
4Turbo/pulse button
5Speed control
6Spindle
7Centrifugal Juicer attachment
8Blender attachment
9Processor bowl attachment
10Dry mill attachment
11Bowl
12Food processor lid
13Whisking blade
14Kneading blade
15Chopping blade
16Chopping blade cover
17Pusher
18Blender jar
19Blender lid
20Measuring cap
21Dry mill jar
22Dry mill lid
23Spatula
24Fine shredding blade
25Coarse shredding blade
26Thick slicing blade
27Thin slicing blade
28Grating blade
29French fry blade
30Blade carrier
31Citrus juice filter
32Reamer
33Centrifugal juicer sieve inner
34Centrifugal juicer seive outer
35Centrifugal juicer lid
36Centrifugal juicer pusher
37Blade storage
38Blade storage cover
Assembly
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
Fitting and removing an attachment
Blending attachment (fig. A)
•Press the safety cover release (2) & raise the safety cover (1) to the open position.
•Fit the blender (8) onto the main unit (3) & rotate
•Place the processor bowl attachment (9) over the spindle (6). Rotate the lid (12) clockwise until it locks in place.