Black & Decker FX1000 English, Blade Storage Fig D, Use Blending Fig A, Mill Fig B, Food Guide

English

Blade Storage (Fig D)

•Place each of the 6 blades (24, 25, 26, 27, 28 or 29) into the slots in the blade storage (37).

•Fit the cover (38) over the blades.

•The blade storage can be placed on top of the processor lid (35) for storage.

Use

Blending (Fig A)

•Place the ingredients in the blender.

•Press the lid (19) onto the jar (18) & insert the measuring cap (20) into the hole in the lid.

•Attach the blender & processing bowl to the main unit.

•Connect the appliance to a suitable electrical supply.

•The blender can be operated by rotating the speed control (5) to the required speed or by pressing the “Turbo / Pulse” button (4).

Note: Always operate the blender with the lid in place.

Note: When blending warm liquids, loosen the measuring cap (20).

Note: Never operate the blender with more than 1000ml of liquid or when empty.

Mill (Fig B)

•Place the ingredients in the mill jar (21).

•Assemble the lid (22) to the jar then fit the assembled mill and processor bowl & lid to the main unit.

•Connect the appliance to a suitable electrical supply.

•The mill should be operated by pressing the “Turbo / Pulse” button (4).

•Do not operate the appliance continuously for more than 1 minute.

•After operating continuously for 1 minute, let it cool down for at least 1-2 minutes before operating it again.

Food Guide

Ingredients Runtime Speed Qty

Pepper/Coffee beans 15-25 sec 10 40 gms

Pulses 25-35 sec 15 50 gms

Whisk, Kneading & Chopping Blade (Fig C)

•Fit the processor bowl (11) onto the main unit (3).

•Fit the whisk (13), kneading blade (14) or chopping blade (15) over the spindle (6).

•Add the ingredients to the bowl & fit the lid (12).

•Connect the appliance to a suitable electrical supply.

•The appliance can be operated by rotating the speed control (5) to the required speed, or pressing the “Turbo / Pulse” button (4).

•Use the food pusher (10) to add food into the processor bowl (12) through the hole in the lid (12).

•When the processing is complete, remove the blade from the bowl before removing the processed ingredients.

•After cleaning, always replace the protective cover (14) on the metal chopping blade (15).

-11-