Seat Position Adjustment | Quantum 1121 3SP, 1121 3MP instruction

V . C O M F O R T A D J U S T M E N T S

9.Reinstall the retaining clip into each seat tower.

10.Reinstall the seat.

11.Plug the controller connector(s) into the electronics

tray.

NOTE: Make sure the seat latch safety is flipped down before using the power chair seat.

Seat Position Adjustment

You can move the seat forward or rearward by chang- ing the extrusion mounting position.

To change the position:
1.	Turn off the power to the controller.
2.	Remove the seat.
3.	Remove both extrusions from the bottom of the
	seat. See figure 10.
4.	Reposition the extrusions on a different set of
	mounting holes. You must move both extrusions
	the same number of holes either forward or
	backward. See figure 15.
5.	Fasten the extrusions back onto the bottom of the Figure 15. Seat Position Adjustment
	seat.
6.	Reinstall the seat.

Manual Recline Seatback Adjustment

If your power chair is equipped with a reclining seat, you can adjust the seatback angle with the seatback release lever. The lever is located on the right side of the seat base.

To adjust the seatback angle:

1.Pull up on the seatback release lever.

2.Move the seatback down or up to the desired position.

3.Release the lever.

Quantum 1121 Series

www.pridemobility.com

21

Image 21

Quantum 1121 3SP, 1121 3MP manual Seat Position Adjustment, Manual Recline Seatback Adjustment

Contents

Quantum Quick Reference Information F E T Y G U I D E L I N E S III N T E N T S N T R O D U C T I O N SafetyPURCHASER’S Agreement Shipping and Delivery S a F E T Y Product Safety Symbols S a F E T Y Pre-Ride Safety Check General GuidelinesModifications Weight Limitations Tire InflationIncline Information Freewheel Mode Braking InformationCornering Information Inclement Weather Precautions Public Streets and Roadways Outdoor Driving SurfacesStationary Obstacles Steps, Curbs, etc Doors Stairs and EscalatorsElevators Lift/Elevation Products Batteries Positioning Belts Prescription Drugs/Physical Limitations Transfers Electromagnetic and Radio Frequency Interference EMI/RFI Alcohol/Smoking I . Y O U R P O W E R C H a I R Quantum 1121 Series Power Chair Active-Trac Suspension Electronics Tray To operate the dual manual freewheel levers Manual Freewheel Lever Initial Assembly Seat InstallationA S S E M B L Y Controller Harness Routing Contour Seat To install the seat You may need the following to make comfort adjustments Comfort AdjustmentsSeat Height and Seat Angle Adjustment O M F O R T a D J U S T M E N T S Manual Recline Seatback Adjustment Seat Position Adjustment Armrest Width Adjustment Seatback Angle AdjustmentArmrest Height Adjustment Armrest Angle Adjustment Foot Platform Height Adjustment Foot Platform Depth AdjustmentController Position To adjust the foot platform angle Foot Platform Angle AdjustmentTo adjust the anti-tip wheels Anti-Tip Wheels Power Elevating Seat Optional To change the seat height through toggle switchTo use the swivel feature B a T T E R I E S a N D C H a R G I N G Batteries and ChargingCharging the Batteries Frequently Asked Questions FAQs Battery Break-in „ Daily Use Why do my new batteries seem weak?„ Infrequent Use How can I get maximum range or distance per charge? How should I store my power chair and its batteries? How can I ensure maximum battery life?What about public transportation? What about shipping? Should your power chair come in contact with water Care and MaintenanceTemperature I . C a R E a N D M a I N T E N a N C E Weekly Checks Daily ChecksTo check the brakes Monthly Checks Cleaning Instructions Disposal of Your Power ChairWheel Replacement Yearly Checks Drive Wheel Battery Replacement Corrective Maintenance When to See Your Quantum Rehab Provider for ServiceTo replace the batteries Terminal. See figure Specifications P E N D I X I Specification S Quantum 1121 Series Dimensions and Ground Clearance T E S T E S Product Serial # Quality Control Quantum 1121 Series