V . C O M F O R T A D J U S T M E N T S
Controller Position
You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either
| WARNING! Do not place the controller | CONTROLLER | |
| harness so that it can be pinched in | BRACKET | |
| the seat frame or the power base |
| |
| frame. | SETSCREW | |
To extend the controller: | |||
| |||
1. | Flip up the armrest so it is perpendicular to the floor. |
| |
2. | Loosen the setscrew on the controller bracket. See |
| |
| figure 17. |
| |
3. | Slide the controller into or out of the armrest to the |
| |
| desired position. |
| |
4. | Tighten the setscrew to secure the controller. |
| |
To change the controller position: | Figure 17. Controller Adjustment | ||
1. | Turn off the power to the controller. |
| |
2. | Unplug the controller connector from the power base. |
| |
3. | Remove any wire ties securing the controller harness to the armrest. | ||
4. | Flip up the armrest so it is perpendicular to the floor. |
| |
5. | Loosen the setscrew on the controller bracket. |
| |
6. | Slide the controller out of the armrest. |
| |
7. | Loosen the setscrew in the other armrest. |
| |
8. | Place the controller in the other armrest. |
| |
9. | Tighten the setscrew to secure the controller. |
| |
10. | Route the controller harness to the back of the power base and plug in the controller. | ||
11. | Secure the controller harness to the armrest with wire ties. | ||
NOTE: If your power chair is equipped with a Specialty Seat, Synergy Seat, or
Foot Platform Height Adjustment
The foot platform height is easily adjusted to one of several different heights.
To raise or lower the foot platform:
1.Remove the nuts and bolts from the foot platform bracket. See figure 18.
2.Raise or lower the foot platform to the desired height.
3.Reinstall the nuts and bolts into the foot platform bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1.Remove the nuts and bolts from the foot platform bracket. See figure 18.
2.Move the foot platform in or out to the desired depth.
3.Reinstall the nuts and bolts into the foot platform bracket and tighten.
FOOT PLATFORM BRACKET |
NUTS AND BOLTS |
BALL DETENT PIN |
Figure 18. Foot Platform Height Adjustment
Quantum 1121 Series | www.pridemobility.com | 23 |
