User’s Manual
OUTDOOR & MARINE USE
Many
•For best performance, keep the unit out of direct sunlight.
•On Ice Maker models, turn the unit OFF and dispose of any ice cubes if the unit will not be used for 5 days or more. Prop door open to allow for air circulation and prevent mold and mildew.
•If the ambient temperature is expected to drop below 45°F, drain all water from the unit to prevent freezing damage not covered by the warranty.
•High ambient temperatures (110°F or higher) may reduce the unit’s ability to reach low temperatures and may also reduce the ice pro- duction rate.
ADJUSTING ICE CUBE SIZE
On models equipped with an ice maker, the cube size may be adjusted by changing the amount of water injected into the ice maker assembly.
1.Remove the ice maker assembly cover (see Figure 23).
2.Locate the adjusting screw on the ice maker assembly control box. The adjusting screw is just below the minus
– +
UL122
Figure 23 | Figure 24 |
18