U-Line pmn manual Adjusting The Temperature Control, Control Knob, Checking Temperature

The ice bin door must be fully closed with the door lip inside the ice bucket.

Frost free models: Do not place any objects over air inlet or outlet in freezer section.

For frost free models: Light frosting may occur in high humidity condi- tions or if the ice bucket is not pushed in completely.

BI 2015 is not frost free and must be defrosted periodically. Refer to

MAINTENANCE.

Do not place cans or bottles so they are touching the back of the unit. If placed against the evaporator section, cans or bottles may freeze.

ADJUSTING THE TEMPERATURE

CONTROL

CONTROL KNOB

Series 2015 and 2075: Adjust control setting by turning the numbered knob attached to the front grille (see Figure 21).

CHECKING TEMPERATURE

To accurately check the tem- perature, insert an accurate thermometer into a plastic (non-breakable) bottle, partial- ly filled with water. Tighten the bottle cap securely (see Figure 22).

Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. Adjust the control knob if necessary and retest.

4

35

26

17

WARMER COLDER

UL315

Figure 21

UL320

Figure 22

17