User’s Manual
GLASS SHELF REMOVAL/INSTALLATION
Removal (see Figure 27)
1.Pull shelf out about 6" until back of shelf clears the
“hump” on the right hand side.
2. Tilt right hand edge of shelf | 2 | |
up. | ||
|
3.Remove shelf from unit by pulling out.
3
1
Adjustment/Installation | Figure 27 | UL301 |
|
|
1.To move to a different position in the unit, insert shelf at an angle, approximately
2.Continue to slide the shelf into the unit at an angle until it clears the door. Lower the shelf and rest it on the rib.
NOTCH
BOSS
DOOR SHELF REMOVAL/INSERTION
To Remove Door Shelf (see Figure 28):
1.Grasp shelf in center, lift slightly, and tilt
2.Carefully pull shelf off bosses.
To Install Door Shelf:
1.Holding shelf in center, align notches in shelf with bosses in door.
UL303 2. | Tilt shelf at a |
| and slide onto bosses at the |
Figure 28 | desired location. |
22