5.Remove existing bottom hinge (3 screws) and remount on oppo- site side TOP. Remove top hinge screw pin.
6.With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (see Figure 13).
UL319
Figure 13
7.Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin (see Figure 14).
8.Tilt top of door into position in top hinge and install top hinge screw pin.
9.Install plastic screw plugs removed in Step 2 in existing hinge holes (3 each, top and bottom).
UL312A
Figure 14
11