CONTROL SETTINGS - COMBO/ICE MAKER
Models BI 2015 and 2075FF are turned ON with the ON/OFF switch recessed in the front grille (see Figure 19). In these units, the control dial is used only for tem- perature control.
TEMPERATURE CONTROL KNOB
4
3 | 5 |
|
2 | 6 | OFF |
|
| ON |
1 | 7 |
|
WARMER | COLDER |
|
ON/OFF SWITCH
UL316B
Figure 19
1.Plug the appliance cord into a 115V polarized and grounded elec- trical outlet.
2.All units are shipped in the ON position.
3.Open the water supply valve in the main water source. As soon as the ice maker mold reaches the proper temperature, the ice maker mechanism will fill the mold with water. The first cubes may be small because of air in the water line. Subsequent cubes will be of standard size. Allow 2 hours for Frostfree models.
It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation.
15 
