STORAGE
If the unit is to be stored or not used for extended periods, it will be necessary to drain the system of water.
1.Shut off water supply at the main water source.
2.Disconnect the water supply line from the solenoid valve.
3.Disconnect the water line from the solenoid valve outlet.
4.Allow the unit to run for an hour or more until all remaining ice cubes have been ejected from the ice maker assembly.
5.Dry out excess water from the ice maker assembly.
6.Prop the door open at least two inches to allow for air circulation and prevent mold and mildew.
7.Disconnect unit from main electrical power source.
8.Leave water supply line and power cord disconnected until ready to reuse.
NOTE
The use of
25 
