Fujitsu MAS3367, MAP3367, MAP3147, MAS3735, MAP3735 specifications Sense data error classification 2

5.2 INIT Error Recovery Methods (Recommended)

Table 5.3 Sense data error classification (2 of 4)

K*	C*	Q*	Outline of Error	L*	Recovery Method
					(See Table 4.4.)
3	11	xx	Unrecovered read error	Need	12

1300 Sync byte not found for data field

1401 No record found

					These errors were detected during accessing of the
					disk media, but they were errors which could not
					be recovered from through the IDD's retry
					processing.
3		15	xx	Positioning error		Need	12
				This is an error of the disk drive’s seek system
3		19	xx	SA information error		Need	7
		1C	xx	SA information error not found
					The information recorded in (SA) on the disk
					media cannot be read correctly.
3		31	00	Medium form at corrupted		Need	18
		31	01	FORMAT command failed
					The data format on the disk media is not correct.
4		03	xx	Peripheral device write fault		Need	7
		32	01	Defect list update failure
					These are errors detected in the operation of the
					disk drive.
4		15	xx	Positioning error		Need	12
					This is an error of the disk drive's seek system.
4		32	00	No defect spare location available		None	19
					No usable alternate blocks exist on the disk drive.
4		40	nn	Diagnostic failure on component 'nn'		Need	13
					An error was detected in the IDD's self-diagnosis.
4		44	nn	Internal target failure		Need	20
					An internal hardware error or a microcode
					detection error was detected in the IDD.
4		4C	xx	Calibration failed		Need	10
		C4	xx	Drive failure
					The initial seek was terminated abnormally. Or, a
					serious error was detected in the drive's control
					system.
*	K: Sense Key				C: Sense Code
	Q: Sub-sense code				L: Logging Necessary? (shown in Section 5.2.3)

C141-E167 5 - 15