Fujitsu MAP3147, MAP3367, MAS3735, MAP3735, MAS3367 specifications Contents

Contents

CHAPTER 1 Command Processing		1-1
1.1	Command Format	1-1
1.2	Status Byte	1-6
1.3	Outline of Command Processing	1-8

1.3.1		Single commands	1-8
1.3.2		Command link	1-9
1.3.3		Disconnect/reconnect processing	1-11
1.3.4 Synchronous mode data transfer/wide mode data transfer			1-15
1.4	Command Queuing Function		1-16
1.4.1		Untagged queuing	1-16
1.4.2		Tagged queuing	1-18
1.5	UNIT ATTENTION Condition		1-19
1.5.1 Generation of the UNIT ATTENTION condition			1-19

1.5.2Response and release condition at UNIT ATTENTION condition hold

		state	1-20
1.5.3 UNIT ATTENTION condition multiple hold			1-22
1.6 Sense Data Hold State			1-22
1.6.1 Sense data hold condition			1-22
1.6.2 Response and release conditions at sense data hold state			1-22
1.7	Command Processing Exceptions		1-23
1.7.1		Overlapping commands	1-23
1.7.2		Illegal LUN specification	1-24
1.7.3		Reserved operation code	1-24
1.7.4 Command processing in the not ready state			1-24
1.7.5		Error recovery processing	1-26
1.7.6		Reset processing	1-27
1.7.7		Fatal hardware errors	1-29
1.8	Data Block Addressing		1-29
1.8.1 Definition of data space			1-29
1.8.2		Logical block addressing	1-32

C141-E167 vii