Fujitsu MAP3367, MAP3147, MAS3735, MAP3735, MAS3367 specifications Write Same

3.4 Maintenance, Diagnostic Commands

• Sense Key : 05 = ILLEGAL REQUEST

•Sense Code/Sub-sense Code : 24-00 = Invalid field in CDB

•	“VALID” Bit	:	“1”
•	“ILI” bit	:	“1”

•Information Field : (“Transfer byte length in the CDB) – (Original “Transfer byte length”)

Remark The calculation formula for the information field expresses 1 logical data block as n physical sectors and n sub-sectors, and when negative, as a complement of 2.

Error recovery processing during execution of this command is performed in accordance with the specifications in the MODE SELECT parameters (Page code 1: Read/Write Error Recovery Parameter, Page Code 21: Additional Error Recovery Parameter, but the AWRE flag and DTE flag are not applied.

3.4.7 WRITE SAME (41)

	Bit	7	6	5	4		3	2	1	0
Byte
0						X‘41’
1			LUN		0	0		PBdata	LBdata	RelAdr
2				Logical Block Address (MSB)
3				Logical Block Address
4				Logical Block Address
5				Logical Block Address (LSB)
6		0	0	0	0	0		0	0	0
7				Number of Blocks (MSB)
8				Number of Blocks (LSB)
9		0	0	0	0	0		0	0	Link

This command requests that the device server write the single block of data transferred by the application client to the medium multiple times to consecutive multiple logical blocks.

A "Logical Block data (LBdata)" bit of zero and a "Physical Block data (PBdata)" bit of zero indicates that the single block of data transferred by the application client shall be used without modification. A "LBdata" bit of one requests that the device server replace the first four bytes of the data to be written to the current logical block with the logical block address of the block currently being written.

A "PBdata" bit of one requests that the device server replace the first eight bytes of the data to be written to the current physical sector with the physical address of the sector currently being written using the physical sector format.

C141-E167 3 - 113