Fujitsu MAS3367, MAP3367, MAP3147, MAS3735, MAP3735 specifications Ackbreqb ACKB/REQB

3.1 Control/Sense Commands

•	SCSI-2 mode
	[Byte 3]
	- AENC (Asynchronous event notification capability):
	Asynchronous condition notify function	[0]
	- TrmIOP (Terminate I/O process):
	TERMINATE I/O PROCESS message	[0]
	[Byte 6]
	- DualP (Dual port):
	Dual port function	[0]
	- Port:
	Connection port, '0'= connect to port A	[0]
	'1'= connect to port B
	- ACKBREQB (ACKB/REQB):
	Use the ACKB and REQB signals with the B cable or the Q cable	[0]
	- Addr32 (Wide SCSI address 32):
	32 bit SCSI addressing	[0]
	- Addr16 (Wide SCSI address 16):
	16 bit SCSI addressing	[0/1]
	[Byte 7]
	- RelAdr (Relative addressing):
	Relative logical block addressing	[0]
	- WBus32 (32-bit wide data transfer):
	Data transfer on a 4-byte bus	[0]
	- WBus16 (16-bit wide data transfer):
	Data transfer on a 2-byte bus	[0/1]
	- Sync (Scychronous data transfer
	Data transfer in the synchronous mode	[1]
	- Linked (Linked command):
	Command link function	[1]
	- TTD (Target transfer disable):
	Target transfer disable message	[0]
	- CmdQue (Command queuing):
	Tagged command queuing feature	[1]
	- SftRe (Soft Reset):
	Soft reset condition	[0]

h.Vendor ID field

This field indicates the name of the product's supplier in left-justified ASCII code, and always indicates FUJITSU. The unused right end is space for the ASCII code.

i.Product ID field

The product's model name is displayed in left-justified ASCII code in this field.

j.Product Revision field

The IDD's microcode version number is displayed in ASCII code in this field.

C141-E167 3 - 7