Fujitsu MAS3735, MAP3367, MAP3147, MAP3735 Self-test result parameter data Page 10, Code

Parameter Data Formats

The values stored in the General usage parameter bytes represent data sent to the device server in a previous LOG SELECT command. If a previous LOG SELECT command has not occurred, the data is zero.

4.2.10Self-test result page (X'10')

	Bit	7	6	5		4	3	2	1	0
Byte
0		0	0	0	1		0	0	1	0
1						X‘00’ (Reserved)
2					Page Length (MSB)
3					Page Length (LSB)

All of the following parameters have this header.

Page Length will be defined based on the value of Parameter Pointer. (CDB 5-6)

4.2.10.1 Self-test result parameter data (Page 10, Code 0001-0014)

	Bit	7	6	5	4	3	2	1	0
Byte
	4	(MSB)
	5			X'0001'-X'0014' (Parameter code)
				(Self-Test Result Parameter)					(LSB)
	6	DU	DS	TSD	ETC		TMC	LBIN	LP
		0	0	0	0	0	0	0	0
	7			X'10' (Parameter Length)
	8	Self-Test Code			0		Self-Test Result Value
	9			Self-Test Segment Number
	10	(MSB)			Time Stamp
	11
									(LSB)
	12	(MSB)
~	~				Address of First Failure				~
~	~								~
	19								(LSB)

20	0	0	0		0	Sense Key
21				Additional Sense Code
22			Additional Sense Code Qualifier
23				X'xx' (Vendor-specific)

Refer the document "T10/99-179r5 Logical Unit Self-test".

4 - 56 C141-E167