Navini Networks, Inc. | Ripwave MX Modem User Guide |
The Parameters
The Screen Option Buttons
The Configuration Screen
At the bottom of the Connection Status screen, are four parameters. These parameters are BTS ID, Network ID, Active SW Version, and Standby SW Version.
The BTS ID indicates the BTS to which the Modem is currently synchronized. The Network ID indicates the network in which the Modem is operating. Active SW Version and Standby SW Version indicate the version number of the software currently loaded in the “active side” and “standby side” of the Modem’s flash memory. The two letters in parenthesis following the release number indicate the type of software load: JD indicates Joint Detection, while EN indicates Enhanced Nulling.
On the
The Configuration screen enables you to update your Modem’s software if your Service Provider directs you to do so. To access the Configuration screen, press the Configuration button.
If you must update your Modem’s software, your Service Provider will provide you with instructions regarding what to do.
21
