Navini Networks MX manual Connecting the S-EBP Indicator Light on the S-EBP, Led

Navini Networks, Inc. Ripwave MX Modem User Guide

Connecting the S-EBP

The Indicator Light on the S-EBP

The optional battery packs are not installed inside the Modem. Instead they are connected to the Modem. To connect the S-EBP to your Modem, plug the battery pack’s pig-tail cord into the input socket located on the back of the Modem.

The S-EBP has one indicator light that resides on top of the unit. This light has four states associated with it. The states are described below.

Battery	Battery	Modem	Modem	Comments
LED	Charger	Connected	On/Off
	Connected	& Switched	Button is
		On	Lit
Green	Yes	Not	Not	Battery fully charged.
		applicable	applicabl
			e
Amber	Yes	Not	Not	Battery charging.
		applicable	applicabl
			e
Off	No	Yes	Yes	Normal. Battery is
				supplying power to
				Modem. No power is
				wasted on the battery
				LED.
Red	No	Yes	Yes	Battery is supplying
				power to Modem. Battery
				is low. 5% charge left.1
Off	No	Yes	No	Battery is out of power.
Off	No	No	No	Battery LED is off. Status
				of battery is unknown.

26

060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)