Navini Networks, Inc. | Ripwave MX Modem User Guide |
Installing the Modem
(See, also, Addendum 1)
The following instructions explain how to install your Modem. Please read all instructions before installing the Modem. Also, turn off the computer and the Modem before installing the Modem.
Note: The Modem should be positioned to minimize interference with other equipment when transmitting. Also, Australian requirements state the Modem should be placed 30 cm or more from any person or user. If the antenna is closer than 20 cm from the user, Australian safety conditions are violated.
Step | Action | Illustration |
1.Connect the Ethernet cable to the Ethernet port on the computer.
2.Connect the other end of the Ethernet cable to the Modem.
Ethernet cable connection
3.Connect the AC power
adapter to the Modem. Plug the other end of the power adapter into a 110/220 VAC 60/50 Hz outlet.
CAUTION! Use only | Power adapter |
the AC power adapter | connection |
supplied with the |
|
Modem. Using any other |
|
adapter can damage the |
|
Modem. |
|
11
