In addition, the iDRAC Configuration Utility enables you to:
•Configure, enable, or disable the iDRAC6 local area network through the dedicated iDRAC6 Enterprise card port or the embedded NIC1.
•Enable or disable IPMI over LAN
•Enable a LAN Platform Event Trap (PET) destination
•Attach or detach the Virtual Media devices
•Change the administrative user name and password and manage user privileges
•View System Event Log (SEL) messages or clear messages from the log
For additional information on using iDRAC6, see the documentation for iDRAC6 and systems management applications.
Entering the iDRAC Configuration Utility
1Turn on or restart your system.
2Press <Ctrl><E> when prompted during POST.
If your operating system begins to load before you press <Ctrl><E>, allow the system to finish booting, and then restart your system and try again.
Using the System Setup Program and UEFI Boot Manager
55
