5Remove the switch and its attached cable from the system.

Figure 3-24. Removing and Installing the Chassis Intrusion Switch

1

2

 

 

3

 

1

chassis intrusion switch

2

securing bracket notch

3

INTRUSION connector

 

 

Installing the Chassis Intrusion Switch

1Align the chassis intrusion switch with the securing bracket notch. See Figure 3-24.

2Slide the switch into the securing bracket notch.

3Connect the switch cable to the INTRUSION connector on the system board. See Figure 6-1.

4Close the system. See "Closing the System" on page 60.

Installing System Components

103

Page 103
Image 103
Dell T110 II owner manual Installing the Chassis Intrusion Switch, 103