Figure 3-25. Removing the Link Bracket Lock

1

1 link bracket lock

6Remove the mounting screw holding the control panel assembly to the front chassis. See Figure 3-26.

7Lift the control panel assembly out of the system.

8Disconnect the control panel cable from the control panel assembly:

CAUTION: Do not pull on the cable to unseat the connector. Doing so can damage the cable.

a Press the metal tabs on the ends of the cable connector. b Gently work the connector out of the socket.

Installing System Components

105

Page 105
Image 105
Dell T110 II owner manual 105, Removing the Link Bracket Lock