Figure 3-13. Removing and Installing a 2.5-Inch Hard Drive

1

2

3

1

hard drive

2

screws (4)

3

hard-drive bracket

 

 

6Slide the hard-drive carrier back in the hard drive bay.

7Close the system. See "Closing the System" on page 60.

8Place the system upright on a flat, stable surface.

9Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing a 2.5-Inch Hard Drive

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

76

Installing System Components

Page 76
Image 76
Dell T110 II owner manual Removing and Installing a 2.5-Inch Hard Drive