Message

Causes

Corrective Actions

Alert! Power

The system configuration

required exceeds

of processor, memory

PSU wattage.

modules, and expansion

Check PSU and

cards may not be supported

system

by the power supply.

configuration.

 

Alert!

 

Continuing

 

system boot

 

accepts the risk

 

that system may

 

power down

 

without warning.

 

If any system components were just upgraded, return the system to the previous configuration. If the system boots without this warning, then the replaced component(s) are not supported with this power supply. See "Power Supply" on page 99.

Alert! System An error caused the system

fatal error to reboot. during previous

boot.

Check other system messages for additional information for possible causes.

BIOS

System is in manufacturing

Reboot to take the system out

MANUFACTURING

mode.

of manufacturing mode.

MODE detected.

 

 

MANUFACTURING

 

 

MODE will be

 

 

cleared before

 

 

the next boot.

 

 

System reboot

 

 

required for

 

 

normal

 

 

operation.

 

 

 

 

 

BIOS Update

Remote BIOS update

Retry the BIOS update. If

Attempt Failed!

attempt failed.

problem persists, see "Getting

 

 

Help" on page 135.

20

About Your System

Page 20
Image 20
Dell T110 II owner manual System configuration