Serial Port 2 IRQ

This reports the IRQ number for serial port 2. This is informational only, and there are no options. If the Serial Port 2 Address field is set to Disabled, this field will not be visible.

Parallel Port IRQ

This reports the IRQ number for the parallel port. This is informational only, and there are no options. If the Parallel Port Address field is set to Disabled, this field will not be visible.

ADVANCED CHIPSET CONFIGURATION SUBMENU

Base Memory Size

When selected, this brings up a dialog box that allows you to set the size of the base memory. The options are 512 KB and 640 KB. The default is 640 KB.

ISA LFB Size

When selected, this brings up a dialog box that allows you to set the size of the video linear frame buffer. The options are Disabled or 1 MB. The default is Disabled. If this is not set to Disabled, then the ISA LFB Base Address field will appear.

ISA LFB Base Address

This reports the base address of the LFB. This is informational only, and there are no options. This field will not appear if the ISA LFB Size is set to Disabled.

Video Palette Snoop

When selected, this brings up a dialog box that allows you to control the ability of a PCI graphics card to “snoop” write cycles to an ISA graphics card’s color pallet registers. The options are Enabled and Disabled. The default is Disabled. Note: Some video capture or TV tuner add-in boards may require this feature to be enabled. Depending on hardware limitations, this item may not appear.

Latency Timer (PCI Clocks)

When selected, this brings up a dialog box that allows you to control the time and agent on the PCI bus can hold the bus when another agent has requested the bus. The valid numbers are between 0 and 256. The default is 66.

PCI Burst

This enables or disables support for PCI/memory burst mode data transfers. The options are Enabled or Disabled. The default is Enabled. PCI burst mode allows higher throughput of data between the PCI bus and memory. Not all cards are capable of utilizing this enhanced data transfer mode. Some cards may act unpredictably with PCI burst mode enabled. If you are having problems with a PCI add in card, PCI Burst mode should be disabled.

SIMM Type Detection

This reports the type of DRAM installed in each of the two memory banks: Fast Page Mode, Extended Data Out Mode, or None. This is informational only, and there are no options.

POWER MANAGEMENT CONFIGURATION

Power Management Configuration enables or disables the Advanced Power Management (APM) support in your system’s BIOS. Power Management will only work with APM-capable operating systems to manage power consumption in your system. If Advanced Power Management is set to Disabled, none of the fields in the Advanced Power Management submenu will be visible.

Advanced/ZP Technical Product Summary Page 29

Page 29
Image 29
Intel 281786-002 manual Advanced Chipset Configuration Submenu, Power Management Configuration

281786-002 specifications

The Intel 281786-002 is a highly regarded microprocessor that was part of Intel’s extensive portfolio of technology solutions. Originally released in the mid-1990s, it is recognized for its robust performance and advanced features, which catered to the needs of both personal computing and embedded systems.

One of the standout features of the Intel 281786-002 is its architecture, which includes a 32-bit data bus. This architecture allows for efficient data processing and memory management. The processor is built on a 0.6-micron process technology, contributing to reduced power consumption while enhancing overall performance. The chip operates at various clock speeds, typically ranging around 25MHz to 50MHz, allowing it to suit different applications and user requirements.

The Intel 281786-002 also boasts a sophisticated instruction set that supports a wide range of operations. This multi-functionality ensures that it can efficiently handle complex computations and multitasking scenarios. Its ability to execute instructions in parallel paves the way for better performance when running multiple applications simultaneously.

In terms of memory support, the processor is designed to interface effectively with both SRAM and DRAM technologies, accommodating a vast range of memory configurations, thereby enhancing flexibility for system designers. It is also compatible with both 16-bit and 32-bit data buses, making it versatile enough for use in various computing environments.

Another notable aspect of the Intel 281786-002 is its integrated security features. These allow for better data protection and integrity, making it a viable choice for systems requiring enhanced security protocols.

Furthermore, the microprocessor's reliability and stability have made it a preferred choice for embedded applications, network devices, and industrial systems. Its proven track record in various computing environments underscores Intel's commitment to quality and performance.

Additionally, the Intel 281786-002 supports various operating systems, providing flexibility in deployment across different computing platforms. This compatibility ensures that users can leverage existing software ecosystems without extensive modifications.

In conclusion, the Intel 281786-002 microprocessor encapsulates an amalgamation of performance, efficiency, and versatility. With its advanced features and robust architecture, it has played a significant role in shaping computing technology, making it a noteworthy component in Intel’s legacy of innovation.