BOOT OPTIONS SUBMENU

Boot Sequence

When selected, this brings up a dialog box that allows you to set the order of drives the system uses to find an operating system to boot from. The following options are available:

C:First, Then A: The system checks drive C first, followed by drive A.

A:First, Then C: The system checks drive A first, followed by drive C.

 

(The above selection allows you to boot from a diskette when necessary.)

C: Only

The system checks drive C and no other drives.

A: Only

The system checks drive A and no other drives.

The default is A: First, Then C:

 

System Cache

When selected, this brings up a dialog box that allows you to enable or disable both the primary and secondary cache memory. The options are Enabled or Disabled. The default is Enabled.

Boot Speed

When selected, this brings up a dialog box that allows you to set the system’s boot speed. The options are Deturbo and Turbo. The default is Turbo. If Turbo is selected, boot-up occurs at full speed. If Deturbo is selected, the board operates at a slower speed (similar to a 25 MHz AT).

Num Lock

When selected, this brings up a dialog box that allows you to set the beginning state of the Num Lock feature on your keyboard. The options are On and Off. The default is Off.

Setup Prompt

When selected, this brings up a dialog box that allows you to turn on the “Press <F1> Key if you want to run Setup” prompt during the power-up sequence. The options are Enabled and Disabled. The default is Enabled.

Hard Disk Pre-Delay

When selected, this brings up a dialog box that allows you to set the hard disk drive pre-delay. The options are Disabled, 1, 2, 3, 4, 5, 6, or 7 seconds. The default is 3 seconds. When enabled, this option causes the BIOS to wait the specified time before it first accesses the hard drive. If your system contains a hard drive, and you don’t see the drive type displayed during boot-up, the hard drive may need more time before it is able to communicate with the controller. Setting a pre-delay will provide additional time for the hard drive to initialize.

Typematic Rate Programming

When selected, this brings up a dialog box that allows you to set the typematic rates. The options are Default and Override. The default is Default. Choosing Override enables Typematic Rate Delay and Typematic Rate.

Typematic Rate Delay

When selected, this brings up a dialog box that allows you to set how long it takes for the key-repeat function to start when you hold down a key on the keyboard. The options are 250, 500, 750, and 1000 millisecond delays. The default is 250. If Typematic Rate Programming is set to Default, this option will not be visible.

Advanced/ZP Technical Product Summary Page 26

Page 26
Image 26
Intel 281786-002 manual Boot Options Submenu

281786-002 specifications

The Intel 281786-002 is a highly regarded microprocessor that was part of Intel’s extensive portfolio of technology solutions. Originally released in the mid-1990s, it is recognized for its robust performance and advanced features, which catered to the needs of both personal computing and embedded systems.

One of the standout features of the Intel 281786-002 is its architecture, which includes a 32-bit data bus. This architecture allows for efficient data processing and memory management. The processor is built on a 0.6-micron process technology, contributing to reduced power consumption while enhancing overall performance. The chip operates at various clock speeds, typically ranging around 25MHz to 50MHz, allowing it to suit different applications and user requirements.

The Intel 281786-002 also boasts a sophisticated instruction set that supports a wide range of operations. This multi-functionality ensures that it can efficiently handle complex computations and multitasking scenarios. Its ability to execute instructions in parallel paves the way for better performance when running multiple applications simultaneously.

In terms of memory support, the processor is designed to interface effectively with both SRAM and DRAM technologies, accommodating a vast range of memory configurations, thereby enhancing flexibility for system designers. It is also compatible with both 16-bit and 32-bit data buses, making it versatile enough for use in various computing environments.

Another notable aspect of the Intel 281786-002 is its integrated security features. These allow for better data protection and integrity, making it a viable choice for systems requiring enhanced security protocols.

Furthermore, the microprocessor's reliability and stability have made it a preferred choice for embedded applications, network devices, and industrial systems. Its proven track record in various computing environments underscores Intel's commitment to quality and performance.

Additionally, the Intel 281786-002 supports various operating systems, providing flexibility in deployment across different computing platforms. This compatibility ensures that users can leverage existing software ecosystems without extensive modifications.

In conclusion, the Intel 281786-002 microprocessor encapsulates an amalgamation of performance, efficiency, and versatility. With its advanced features and robust architecture, it has played a significant role in shaping computing technology, making it a noteworthy component in Intel’s legacy of innovation.