![](/images/new-backgrounds/1148731/14873185x1.webp)
Max 410/420/430 User’s Guide – Chapter 5
menu. To modify any parameters on the page, simply enter the desired values into the respective boxes.
NOTE:
DHCP users: If your LAN uses DHCP addresses, you do not have to configure this page. You may proceed directly to Account Configuration, later in this chapter.
Static address users: Your IP address and Subnet netmask are already present in the IP Configuration table. Now you need to enter the additional IP parameter information you obtained from your LAN administrator. See the IP Configuration section for more details.
Network Configuration Table
The Network Configuration table displays the doorman IP addresses and ports, and the TCP/UDP start ports; the Port numbers parameters must be changed to permit access when a LAN’s firewall permits only
Figure 13 – Network Configuration Table
The table includes the following fields:
Doorman
Primary IP
oIP Address o Port
Secondary IP o IP Address o Port
35