Max 410/420/430 User’s Guide – Chapter 5

ensure that after the upgrade, the faxes will be transmitted using the T.38 fax protocol on the Net2Phone network.

a.In the Web Manager, click the Account Config link in the sidebar menu.

b.For each port that has a setting of Y in the FAX Only field, click the N radio button. If no ports are set to Y, you can proceed to the Performing the Upgrade section below.

c.Click the Save Changes button at the bottom of the page to save the settings.

Once you have completed this procedure, proceed to the following section, Performing the Upgrade.

Performing the Upgrade

To upgrade the Max firmware:

1.Click the Download button to download the executable file to the C:\Net2Phone\Upgrade folder.

2.Open your Windows Explorer and navigate to the C:/net2phone/upgrade folder. Double-click the max4x0up.exe file to begin the upgrade process.

3.You will be prompted for the following information:

a.User Name

b.Password

c.Max IP Address

4.Follow the remaining prompts to complete the upgrade.

If you encounter any problems after you have upgraded the Max, including faxing, calling, receiving calls, etc., re- load the factory default settings and re-enter your configuration settings.

To re-load the factory default settings and re-enter your configuration settings:

1.In the Web Manager, click the Load Default Config link in the sidebar menu.

67

Page 75
Image 75
Net2Phone Max 410, Max 420, Max 430 manual Performing the Upgrade, To upgrade the Max firmware