Max 410/420/430 User’s Guide – Appendix
Make sure both the user name and password are correct (note that the user name and password are case sensitive).
Configuration Problems
In the Max Web Manager Network and Voice Configuration page, I omitted the DNS server field because it does not apply to me, but now the Max Web Manager will not let me save the settings.
The DNS fields must not be left blank. If you do not wish to enter DNS Servers, you must enter
0.0.0.0in those fields.
In the Max Web Manager’s Account Configuration page, I accidentally checked the “Use account for all fields” check box and saved the changes. Now the different accounts I had in each port are no longer present. How can I put them back?
You must make sure the Use account for all fields checkbox is unchecked, and enter the account information again manually.
When I dial the extension that I routed to port 1, it rings port 2, and when I dial the extension I routed to port 2, it rings port 3, etc…
In the Routing Table Configuration page, make sure you routed each extension to the logical port number of the desired port, not the labeled or physical port number. To find the logical port number for each port, refer to Logical Port Numbering on page 48 in this Guide.
Calling Problems
When I attempt to make a call, I hear a fast busy signal.
Click the Show Log Messages link to access the Current System Log Messages page (see Show Log Messages on page 51 in this
76
