![](/images/new-backgrounds/1148731/14873197x1.webp)
Max 410/420/430 User’s Guide – Chapter 5
firewall for your Max 410/420/430 unit), you must specify these open ports on the Max device(s):
a.Change the TCP Start Port to the port you opened in step
b.Change the UDP Start Port to the port you opened in step
Figure 17 – Network Configuration Table
3.After you have made the desired changes, click the Save button at the bottom of the page to save the new settings, then restart the Max.
The new settings should now be in effect.
NOTE: Some firewalls require the opened port to be forwarded to the Max’s IP address. Consult your LAN administrator to determine if this is the case with your firewall.
Account Configuration
Click the Account Config link to access the Account Information page, illustrated in Figure 18 below.
41