Net2Phone Max 420, Max 410 On the New York City local Max unit, On the London remote Max unit

Max 410/420/430 User’s Guide – Chapter 6

On the New York City (local) Max unit:

The New York City Max’s four FXO ports have been configured for Max-to-Max calling and their Max-to-Max IVR setting is IVR Off.

Extension number 4000 on the PBX has been assigned to this group. The group is configured on the PBX as a hunt group so that, when 4000 is dialed from an extension on the PBX, the PBX connects the caller to the first available unoccupied port on the Max within the group.

On the London (remote) Max unit:

The account number of the London unit is 1234567890.

The Welcome and Password option has been selected on that unit’s Max-to-Max IVR Config table.

Now we can proceed with the call.

1.Dial 4000 from your office PBX extension. You hear an Internet dial tone.

2.Dial *72 + the remote FXO port’s account number, e.g., *72 1234567890 #.

The Max in the London office greets you, “Welcome to . Please enter your password.”

3.Enter the password.

The Max in London responds, “Please enter the number you wish to call.”

4.Enter Windsor Castle’s city code and local number as if you were dialing an inter-city call from London: 0753 831118.

The voice prompts you receive from the remote unit would depend on how its Max-to-Max IVR options were configured.

Depending on the options set by the remote system’s manager:

you might immediately be asked for a number you wish to call,

you might be asked for a password, or

71