Max 410/420/430 User’s Guide – Chapter 3
Entering an IP Address from a Telephone Keypad (Max 420/430)
Ask your Network Administrator for the IP address that will be assigned, the LAN’s netmask address, domain name, and any other IP parameters that can be provided.
To enter an IP address:
1.Lift the telephone handset and dial ***2 (the IP address parameter code).
The voice prompt responds, “Please enter your IP address.”
2.Dial the numbers for the IP address you wish to enter on the telephone keypad. Use the star key (*) to replace the periods in the address and end with the pound key (#).
For example, if you want to enter the IP address 192.168.172.19, you would enter
192*168*172*19# from your telephone keypad. The voice prompt responds, “Your IP address is…” and repeats the address you entered.
3.If the new address is correct, simply hang up the telephone. If the new address is incorrect, hang up the telephone and repeat from step 1, above.
4.Reset the Max 420 to activate the changes. To do this,
You are now ready to finish setting up the Max 420 using the Max Web Manager. Proceed to Chapter 3, Logging Into the Max Web Manager.
Entering a Netmask Address from a Telephone Keypad (Max 420/430)
To enter a netmask address:
1.Lift the handset and dial ***3 (the netmask parameter code).
The voice prompt responds, “Please enter your netmask.”
2.Proceed as in step 2, above, entering the desired netmask address from the telephone keypad.
23
