Net2Phone Max 410 Class of Service Configuration, To add restricted digits to a class definition

Max 410/420/430 User’s Guide – Chapter 5

1.Click in the Allow List box for the port that you would like to configure.

2.Enter the number(s) that you would like to allow for that port. Separate numbers with a comma

(,).

3.Select the radio button that represents how you would like unauthorized callers to be handled. Click one of the following radio buttons: Allow All Callers, Disconnect Unauthorized Caller, or

Request Account and PIN From Unauthorized Callers.

4.Click the Save button to save the setting. A page displays the message, “Command executed successfully.”

Class of Service Configuration

This function is to set the call authorization classes for restricting outbound calls. There are 6 classes: A, B, C, D, E, and U. Class A has the most outbound call access capability. Class B has the second most outbound call access capability, and so on. Applying the restricted first digit string to a class means that the restriction is applied to all lower classes and not to higher classes. Class U has the same meaning as OFF – there is no outbound call control.

To add restricted digits to a class definition:

1.In the ADD Command table, click the Class drop-down menu to select the class to which you would like to define restricted digits.

2.In the Restricted First Digit box, type up to eight

(8) digits of the number you would like to restrict.

For example, if you want to create a class that does not allow outbound calls to any numbers beginning with 1-973, you would enter 1973.

You can also enter 973 to restrict callers who do not enter the 1 prefix.

58