Max 410/420/430 User’s Guide – Chapter 5
Port Configuration
In the Address Table Configuration table on the Port Configuration page, you can assign a local address to each port, allowing you to simulate a local PBX in which the ports can easily communicate with each other.
To assign an address to a port:
1.Click the Port Configuration link on the Site Map page or on the sidebar menu.
2.Click in the Local Address field corresponding with the port number you would like to configure.
3.Enter the local address.
4.Click the Save button to save your setting.
Figure 12 – Port Configuration Page
Network and Voice Configuration
The Network and Voice Configuration Page contains four separate tables:
Network Configuration
Voice Configuration
IP Configuration
CDR Configuration
To access the Network and Voice Configuration page, click the Network and Voice Config link in the sidebar
34
