8Remove all memory modules. See "Removing Memory Modules" on page 88.
CAUTION: The processor and heat sink can become extremely hot. Allow sufficient time for the processor and heat sink to cool before handling.
9Remove the processor heat sink. See "Removing the Processor" on page 91.
10Using a #2 Phillips screwdriver, remove the ten screws securing the system board to the chassis and then slide the system board toward the front end of the chassis.
CAUTION: Do not lift the system board by grasping a memory module, processor, or other components.
11Grasp the system board by the edges of the system board and lift the system board out of the chassis. See Figure
Figure 3-27. Removing and Installing the System Board
1
2
1 | screws (10) | 2 | system board |
