Message

Causes

Corrective Actions

Local keyboard The USB ports are disabled

may not work in the system BIOS. because all user

accessible USB ports are disabled. If operating locally, power cycle the system and enter system setup program to change settings.

Power down and restart the system from the power button, and then enter the System Setup program to enable the USB port(s). See "Entering the System Setup Program" on page 36.

Manufacturing

System is in manufacturing

Reboot to take the system out

mode detected.

mode.

of manufacturing mode.

 

 

 

Maximum rank

Invalid memory

Ensure that the memory

count exceeded.

configuration. The system

modules are installed in a valid

The following

will run but with the

configuration. See "General

DIMM has been

specified memory module

Memory Module Installation

disabled: x

disabled.

Guidelines" on page 86.

 

 

 

Memory address

Faulty or improperly

See "Troubleshooting System

line failure at

installed memory modules. Memory" on page 119.

address, read

 

 

value expecting

 

 

value.

 

 

 

 

 

Memory double

Faulty or improperly

See "Troubleshooting System

word logic

installed memory modules.

Memory" on page 119.

failure at address, read value expecting value.

Memory

Invalid memory

Initialization

configuration. The system

Warning: Memory

will run but with less

size may be

memory than is physically

reduced.

available.

Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 86.

About Your System

23

Page 23
Image 23
Dell T110 II owner manual Invalid memory Ensure that the memory