GE Monogram ZIDS240 Built-In Dimensions/Installation, Product clearances, ZIDI240 model only

Built-In Dimensions/Installation

Double-Drawer Refrigerator

Product clearances

On stainless steel model ZIDS240, allow 22″ min. clearance from the front of the double-drawer for drawer opening.

On custom panel model ZIDI240, allow

231⁄8″ min. clearance from the front of the double-drawer for drawer opening.

When installed into a corner, allow 21⁄2″ min. clearance between double-drawer and adjacent cabinet, wall or other appliances.

NOTE: Clearances are based on the recommended 21⁄8″ handle standoff depth. Custom handle clearances may vary depending on the standoff of the custom handles.

When installed in a corner:

Countertop

Double-Drawer

22" (with Custom Panels

23-1/8" min.)

Clearance for Door

Opening 2-1/2" min.

Black or Stainless Steel Toekick Options

Your custom panel (ZIDI240 model only) double-drawer refrigerator is shipped with two toekicks, a stainless steel and a black toekick. For shipping purposes, one of the toekicks will be secured to the back or inside of the unit, and the second will be installed on the unit. Keep the unused toekick and other unused or removed parts for possible future use.

Installing custom 3/4 ″ drawer panels and handles

(ZIDI240 model only)

3/4″ Overlay Panel Dimensions

Model ZIDI240 requires field-installed overlay drawer panels.

•The overlay panels must be secured to 1/4″ thick backer panels that slide into the trim. A 0.10″ thick spacer panel must be placed between the overlay and backer panels.

•Custom handles of your choice, supplied by your cabinet maker, must be installed on these overlay panels. Countersink all screws into the backer panels. Screws cannot protrude from the backer panels.

NOTE: Maximum total weight for custom

Overlay

Panel

Door

1/4"

Backer0.10"

Panel Spacer

Assemble overlay panels with glue and screws

drawer panels are 25 lbs. (121⁄2 lbs. max. each drawer).

		A
				3/4″ Overlay Panel Dimensions
121⁄2	lbs. max.			(in inches)
			B		A (Width)	B (Height)
				1/4″ Backer	233⁄16″	1411⁄16″
	*
				0.10″ Spacer	221⁄2″	143⁄16″
121⁄2	lbs. max.		B
				″	5 ″	1 ″

1.Center spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.

Overlay Panel

Spacer Panel

Backer Panel

14

3/4 Overlay 23 ⁄8 15 ⁄16

*Maintain a 1/4″ min. gap between top and bottom drawer panels.

2.Center the spacer/backer panel on the overlay panel. Secure with glue and screws. Countersink all screws into the backer panel.