
Installing
″
Installation
Install custom drawer panels and handles
custom 3/4 drawer panels and handles
(cont.)
(ZIDI240 model only)
1.Open drawers.
2.Remove 2 screws holding trim; lift trims off. Retain screws.
3.Custom handles of your choice, supplied by your cabinet maker, must be installed onto the overlay panels before they are slid into the trims. Countersink all screws into the backer panels. Screws cannot protrude from the backer panels.
Screws Must
Be Countersunk
Into Panel
Handle
Custom
Drawer Panel
4.Slide overlay panels into the trims.
5.Reinstall the side trims using the trim screws removed earlier.
6.Place the brushed decorative covers over the side trim to hide the screw heads. Ensure side trim is aligned
6.NOTE: For shipping purposes, the brushed decorative cover will be secured to the front of the unit.
15