Controls and Features
Glass divider
The top drawer has a moveable, tempered glass divider for separating and organizing foods. The divider can be placed in one of two locations.
To remove the divider, lift up until divider clears the rear and front retaining slots.
To replace the divider, slide into one of the divider locations.
The glass divider is dishwasher safe, top rack only.
Divider locations
(2)
(1) 
Glass divider
Snugger
The snugger attached to the glass divider | Lever |
helps prevent tipping, spilling or sliding of small items when the top drawer is opened. Lift the lock down lever near the top of the snugger then move it to fit your needs. Press the lever down to lock the snugger in place.
The snugger is dishwasher safe, top rack only.
Locked
Unlocked 
Snugger
Assembly instructions
To remove:
1.Lift the glass divider assembly out of the drawer by grasping the glass divider and snugger where the lever is located. Sit the assembly on a sturdy surface.
2.Lift the lever.
3.Slide the snugger off the glass divider.
4.Remove the lever from the snugger by lifting the lever up and sliding it down and out of the assembly.
NOTE: The glass divider, snugger and lever can be cleaned on the top rack of a dishwasher.
To replace or relocate:
1.Reassemble lever into snugger by sliding the lever up into place.
2.Slide glass divider into the snugger. The lever must be installed before sliding the divider into the snugger.
3.Put the glass divider assembly in the desired divider location in the top drawer.
Lever
Snugger
Glass divider
Lever
9
